2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 227Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 227

5Bend the washer tabs and remove the two cap screws securing the sprocket to the camshaft; then drop the sprocket off the
(account for washer); then remove the tensionerCC011D 4Using an awl, rotate the C-ring in its groove until it is out of the
cylinder head; then remove the C-ringNOTE: Care should be taken not to drop the C-ring down into the crankcase 7Remove the
five nuts securing the cylinder head to the cylinder; then remove the four cylinder head cap screws with copper washers (note