2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 231Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 231

4Remove the inside circlip 7Remove the cap screws securing the left-side cover to the crankcase and note the location of
and spring 8Using Side Case Puller (pn 0644-262), remove the side coverAccount for gasket, two alignment pins, and an idle
gear limiter bushingNOTE: Inspect the inside of the left-side cover for the four shaft washers that may have come off with
the coverThe three gear shaft washers are identical and interchangeableThe shift shaft washer is larger diameterKeep the