2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 239Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 239

21Remove the three Phillips-head screws securing the oil pump; then remove the oil pumpNOTE: It may be necessary to use
and disassemble only those components which need to be addressed and to service only those componentsThe technician should
use discretion and sound judgment 22Remove the cap screws securing the oil strainer cap; then remove the capAccount for the
O-ring Separating Crankcase Halves 1Remove the five right-side mm cap screws (one from inside the case) securing the crankcase
halvesNote the location of the different-lengthed cap screwsCC091D 23Remove the two Phillips-head cap screws securing the