2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 242Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 242

AT THIS POINT To service gear shift forks, see Servicing Center Crankcase Components sub-section 6Remove the reverse idle
and sound judgment 8Remove the front output shaft (J) and rear shaft assembliesAccount for the bearing C-ringNOTE: Note the
alignment marks on the crank balancer driven gear and balancer drive gear to aid in assemblyCD832B NOTE: There is flat spot
on the crank balancer to allow clearance past the crankshaft 11Using the Crankcase SeparatorCrankshaft Remover (pn 0444-009),
push the crankshaft assembly out of the crankcase 9Remove the driven gear from the crank balancer assembly (A)Account for
keyCC115D AT THIS POINT To service crankshaft assembly, see Servicing Center Crankcase Components sub-section ! CAUTION Do