2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 254Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 254

7Install the shaft, spring, and the spring cover 10With the 50 cm (20 in of rope exposed, hook the rope in the notch of
tension 8Install the friction plate with the ratchet guide fitting into the ratchet 13Place the recoil starter assembly into
position on the left-side cover; then tighten the cap screws to specifications CC039D B602D 9While pushing down on the reel,
install the nutTighten securely MEASURING SHIFT FORK (Thickness) NOTE: Whenever shift fork is out of tolerance, replacement