2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 259Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 259

Backlash Measurement Under 0.05 mm (0.002 in At 0.05-0.33 mm (0.002-0.013 in Over 0.33 mm (0.013 in Shim Correction Decrease
to the illustrations Correcting Tooth Contact NOTE: If tooth contact pattern is comparable to the correct pattern illustration,
no correction is necessary If tooth contact pattern is comparable to an incorrect pattern, correct tooth contact according
to the following chartTooth Contact Contacts at Top Contacts at Root Shim Correction Decrease Shim Thickness Increase Shim
Thickness NOTE: To correct tooth contact, steps and (with NOTE) of "Correcting Backlash" must be followed and the above "Tooth
ContactShim Correction" chart must be consulted ! CAUTION After correcting tooth contact, backlash must again be checked
and corrected (if necessary)Continue the correcting backlashcorrecting tooth contact procedures until they are both within