2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 272Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 272

NOTE: Prior to joining crankcase halves, turn the shift cam to ensure all gears shift properly 4From the right side, install
5From the left side, install the seven case half mm cap screws noting the location of the wiring form; then tighten only
until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking occurs CC234DA 2Using plastic mallet, lightly
tap the case halves together until cap screws can be installed3From the left side, install the three case half mm cap screws
(two inside the case); then tighten only until snugNOTE: Rotate the shafts back and forth to ensure no binding or sticking