2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 276Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 276

16Install the clutch release arm and release roller guide making sure the release roller and guide are aligned FWater Pump
#243Tighten securely NOTE: Care should be taken that the alignment pins are installed in the right-side cover 18Install the
reverse cam stopper housing and gasket making sure the stopper and spring are correctly positionedTighten to specifications
20Place the gasket and right-side cover into position making sure the release roller guide remains correctly positioned and
that the water pump drive adapter aligns; then install the fifteen cap screwsNote the proper location of the long cap screw