2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 278Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 278

5Install the spacer onto the driveshaft CC049D CC258D 6Place the splined bushing onto the driveshaft making sure the oil
the starter idle gear pin into the crankcase; then with the beveled side of the idle gear facing the crankcase, install the
idle gear and spacer 7In turn on the driveshaft, install the #1 drive gear and washer; then secure with the circlip 4Place
the bushing onto the output shaft; then install the driven gear and washer 8Place the select sliding dog gear and washer