2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 284Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 284

6Place the chain guide into the cylinder ! CAUTION Care should be taken that the bottom of the chain guide is secured in
(18 ft-lb)Using crisscross pattern, tighten the four mm nuts (from step 9) to 1.1 kg-m (8 ft-lb)Tighten the two cylinder-tocrankcase
nuts (from step 4) securelyCF057A 8Install the four cylinder head cap screws with copper washers (note the locations of the
different-lengthed cap screws)Tighten only until snug 11With the timing inspection plug removed and the chain held tight,
rotate the crankshaft until the piston is at top-dead-center12With the alignment pin installed in the camshaft, loosely place