2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 302Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 302

3Remove the three cap screws securing the water pump to the engine; then remove the water pump FI185A 5Remove the starter
for installing purposes; then remove the left-side coverAccount for gasket and two alignment pins 6Remove the starter idler
shaft (1) and the starter idler gear (2); then remove the shift shaft (3)Account for two washers on the shift shaft NOTE:
Inspect the inside of the left-side cover for any shaft washers that may have come off with the coverMake sure they are returned