2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 305Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 305

Right-Side Components NOTE: For efficiency, it is preferable to remove and disassemble only those components which need to
mm deep-well socket and suitable holding tool, remove the crankshaft balancer drive gear nut (1) from the crankshaft; then
remove the drive gear (2)Account for washer (3) and drive pin (4) Removing Right-Side Components AV-Belt Cover BDriven Pulley
CClutch Cover 1Remove the cap screws securing the V-belt cover; then using rubber mallet, gently tap on the cover tabs to
loosen the coverAccount for gasket2Remove the bearing cap; then using Spanner Wrench (pn 0444-153) to hold the drive pulley,