2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 334Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 334

Installing Right-Side Components 1Install the shift indicator sending unit making sure the two neutral contact pins and the
nut (threads coated with red Loctite #271)Tighten to specifications ! CAUTION Care must be taken that the directional washer
be installed correctly and note that the nut has left-hand threads 5Install the clutch cover alignment pins into the crankcase,
apply oil to the cover gasket, and install the gasket onto the crankcase6Apply grease to the outer edges of the clutch housing;
then from inside the clutch cover, install the clutch housing into the cover using rubber mallet7Install the one-way clutch