2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 335Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 335

13Place the V-belt into position over the front shaft FI442A 8Place the clutch coverclutch housing assembly into position
housing spacer onto the shaftSecure the drive face with cap screw (threads coated with red Loctite #271)Tighten the cap screw
to specifications ! CAUTION Make sure the splines extend beyond the movable drive face plate or the clutch housing spacer
may become jammed when the cap screw is tightenedThis could result in false torque reading 10Place the driven pulley assembly
into position and secure with the nutTighten to specifications11Slide the fixed drive face onto the shaft12Spread the faces