2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 336Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 336

15Rotate the V-belt and drivedriven assemblies until the V-belt is flush with the top of the driven pulley16Install the V-belt
the drive pinSecure with the circlipFI220 17Place the V-belt cover gasket into position; then install the cover and secure
with the cap screws making sure the different-lengthed cap screws are in their proper locationTighten the cap screws to specifications
NOTE: The sharp side of the circlip should be facing outward Installing Left-Side Components 1Install the oil pump securing