2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 359Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 359

NOTE: If the oil pressure is higher than specified, check for too heavy engine oil weight (see Section 2), clogged oil passage,
the oil cooler located on the back of the radiator2Remove the radiator (see Radiator) in this section3Remove the fan and
fan shroud; then separate the oil cooler from the radiatorINSTALLING 1Remove the input and output hoses from the fittings
on the cooler ! CAUTION Elevate and secure the hoses to avoid oil spillage 2Remove the cap screws securing the oil cooler
to the frameAccount for grommets 1Place the oil cooler into position on the radiator and secure with the retainer brackets;
then install the fan shroud and fan2Install the radiator (see Radiator) in this section3Connect the oil hoses to the oil
cooler and tighten the clamps securely4Warm up the engine and check for leaks; then shut off the engine and check for the