2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 371Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 371

Oil Temperature and Cooling Fan Switches (400) NOTE: This model has an oil temperature switch and cooling fan switch 1Connect
switch must be in the OFF position 733-554C 1Set the meter selector to the OHMS position2Connect the red tester lead to one
black wire; then connect the black tester lead to the other black wire 3On the oil temperature switch when the oil temperature
reaches 160 (320 F), the meter should read closed circuit4On the oil temperature switch, allow the oil to cool, and when
the temperature is at (or just before) temperature of 140 (284 F), the meter should read an open circuit5On the cooling fan
switch when the temperature reaches 120 (248 F), the meter should read closed circuit6On the cooling fan switch, allow the
oil to cool, and when the temperature is at (or just before) temperature of 110 (230 F), the meter should read an open circuit7If
the readings are not as indicated, the switch must be replaced 3When the lever is compressed, the meter must show less than