2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 376Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 376

4Connect the APS to the harness; then using MaxiClips (pn 0744-041), connect the red tester lead to the brownwhite wire and
to testing the speed sensor, inspect the three-wire connector on the sensor harness (400500 manual models) or on the speed
sensor (500 auto650 H1700 EFI models) for contamination, broken pins, andor corrosion To replace speed sensor, use the following
procedure1Disconnect the three-wire connector from the speed sensor harness or from the speed sensor; then remove the Allen-head
cap screw securing the sensor to the sensor housing2Remove the sensor from the sensor housing accounting for an O-ring CD884A
CD070 3Install the new speed sensor into the housing with new O-ring lightly coated with multi-purpose grease; then secure
the sensor with the Allen-head cap screw (threads coated with blue Loctite #242)Tighten securely 1Set the meter selector