2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 385Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 385

BTouch the black tester lead to ground brushCTouch the red tester lead to the brush holder assemblyNOTE: If no resistance
brush holder 2On the positive post, install an O-ring washer, fiber washer, flat washer, and lock washerSecure with the nut
5Apply small amount of grease to the rear cover bushing; then install the cover on the starter housing making sure the reference
marks align 3Align the tab on the brush holder with the notch in the starter housing; then install 6In order, install the