2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 393Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 393

REMOVING 1Remove the left-side engine cover; then disconnect the three-wire TPS connector plug 4Turn the ignition switch
1Place the TPS into position on the throttle body and secure with the two screwsDo not tighten at this time2Connect the main
harness to the TPS3Locate the diagnostic connector under the seat; then install the test plug from Test PlugError Code List
Kit (pn 0444-216) onto the connector FI459B FI452A 5Tighten the mounting screws securely; then verify the TPS icon appears