2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 397Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 397

Front Differential NOTE: To remove the rear gear case, see Rear Gear Case in this section REMOVING DIFFERENTIAL 1Secure the
are loose to ensure proper seating of the actuatorATV0082A 5Tighten the remaining cap screws; then connect the electrical
plug to the main harness6Turn the ignition switch to the ON position and check the operation by shifting the selector switch
several times7Secure the wiring harness to the frame with nylon cable tie; then install the inner fender panel 3Remove the
front wheels4Pump up the hand brake; then engage the brake lever lock5Remove the cotter pin securing the hex nut; then remove