2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 401Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 401

Assembling Input Shaft 1Place the pinion housing in press and install the input shaft bearingSecure the bearing with the
shaft bearing; then place the pinion housing in press and remove the bearingAF993 AF983 AF994 2Install the input shaft seal
making sure it is flush with the edge of the housing3Lubricate the input shaft splines with High-Performance Grease (pn 0436-905)NOTE: