2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 405Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 405

738-268B ACover Sideadd value on the gear case housing to value (all models except 400 TRV) or value (400 TRV) on the gear
grease to all oil seal lips5Prior to final assembling, prelubricate journal on pinion assembly with SAE 80W-90 hypoid gear
lubricant prior to pressing assembly into gear case housingAssembling Pinion Gear 3Install the pinion gear assembly into
the housingUsing the 48 mm Internal Hex Socket (pn 0444-104), secure the pinion gear assembly with the existing lock collarTighten
to specificationsNOTE: On front differential, the lock collar has right-hand threadsOn rear gear case, the lock collar has
left-hand threads 1Install the bearing onto the pinion shaftInstall the pinion shaft collar 4Place punch on the edge of the
lock collar in the oil gallery area; then using hammer, stake the lock collar to ensure that the collar will remain securely