2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 412Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 412

DISASSEMBLING AXLES 1Using side-cutters (or suitable substitute), remove the large clamp from the boot 5Inspect the splines
from the shaftCD021 3Using snap ring pliers, remove the circlip securing the bearing ring to the shaftNote the direction
of the bearing for assembling purposes NOTE: At this point if the outside boot is damaged, continue with step 7 7Using side-cutters
(or suitable substitute), remove both outside boot clamps from the shaftNote the position of the different-sized clamps for