2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 413Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 413

8Apply 40 grams (13 of contents) of grease from the Grease Pack (pn 0441-173) into the knuckles and the new outside boot
boot seats down into the recessed groove ! CAUTION Do no over-fill the joint as boot damage may occur resulting in joint
failure 9Slide the new outside boot onto the shaft with the new clamps positioned as shownNote the different-sized clamps
from removalNOTE: The boot is positioned correctly when the small end of the boot seats down into the recessed groove 2Using
the boot clamp pliers, secure the small clamp of the inner boot 10Using CV Boot Clamp Tool (pn 0444-120), secure both outside
boot clamps ATV-1048 ! CAUTION It is important that the clamps are positioned correctly or they may loosen when in motion