2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 420Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 420

2Place bushings and sleeves (where appropriate) into shock eyelet; then install shock with two cap screws and nutsTighten
then remove the tie rod end from the knuckle Front A-Arms REMOVING 1Secure the ATV on support stand to elevate the front
wheels; then remove the wheels ! WARNING Make sure the ATV is solidly supported on the support stand to avoid injury 2Remove
the cotter pin from the nutDiscard the cotter pin 7Remove the cap screws securing the ball joints to the knuckle ! CAUTION
Support the knuckle when removing the cap screws or damage to the threads will occur 3Remove the nut securing the hub4Remove