2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 432Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 432

ASSEMBLING AND INSTALLING 1Install the bearing; then install the snap ring making sure it seats into the knuckle 5Install
caliper to the knuckle with the two cap screwsTighten to specifications 3Install the tie rod end and secure with the nutTighten
to specifications; then install new cotter pin and spread the pinNOTE: During assembling, new cotter pins should be installed
8Pump the hand brake lever; then engage the brake lever lock9Secure the hub nut (from step 6) to the shaftTighten to specificationsAF759D