2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 433Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 433

CD012A CD006 12Remove the ATV from the support stand 5Adjust the handlebar direction until the two measurements are equal;
tires or inaccurate measurements can occur 6Measure the distance from the inside of each front rim to the lower frame tube
3Place the ATV in level position taking care not to push down or lift up on the front end; then turn the handlebar to the
straight ahead positionNOTE: When measuring and adjusting, there should be normal operating load on the ATV (without an operator
but with Arctic Cat approved accessories) 4Measure the distance from the outside edge of each handlebar grip to the seat