2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 444Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 444

INSTALLING MUFFLER 1Place the muffler into position engaging the mounting lugs into the grommets; then slide the muffler
the gas tank capNOTE: If the front body panel has not been removed, the left-side and right-side panels and the two machine
screws must be removed (see Front Body PanelSide Panels in this section) CLEANING AND INSPECTING NOTE: Whenever part is worn
excessively, cracked, or damaged in any way, replacement is necessary 1Clean all rear body panel components with parts-cleaning
solvent and soap and waterCD691A 2Inspect side panels and rear body panel for cracks and loose rivets3Inspect threaded areas