2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 445Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 445

INSTALLING 1Remove the gas tank cap and set the rear body panel in position; then install the cap and connect the taillightbrakelight
off the ATVCD690A 3Install one shoulder screw and three plastic rivets (on each side) to secure the front of the rear body
panel to the footwells 3Remove the two cap screws (located inside the side storage box) securing the box to the footrest4Remove
the screw securing the box to the side panel5Remove cap screws (A and B) securing the box to the frame 4Place the battery
into the battery box; then connect the battery (positive cable first) and secure with the battery coverCD045A CLEANING AND
INSPECTING NOTE: Whenever part is worn excessively, cracked, or damaged in any way, replacement is necessary 1Clean all side
storage box components with soap and water2Inspect the box for cracks, tears, and loose mounting hardware3Inspect the box