2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 447Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 447

2While an assistant holds the cargo box in the raised position, secure the lower end of the box lift support to the frame
1To remove the seat, lift up on the latch release (located at the rear of the seat)Raise the rear of the seat and slide it
rearward2To lock the seat into position, slide the front of the seat into the seat retainers and push down firmly on the
rear of seatThe seat should automatically lock into positionREMOVINGINSTALLING (TRV) Taillight Assembly REMOVING 1Unplug
the three-prong connector and free the taillight wiring harness from the frame2Remove the torx-head cap screws securing the
taillight assembly to the frameAccount for any washers3Remove the taillight assemblyINSPECTING NOTE: Whenever part is worn
excessively, cracked, or damaged in any way, replacement is necessary 1To remove the rear seat, pull the two latch handles
to the rear and rotate them to the vertical position 1Inspect wiring harness, three-prong connector, lens, base, cap screws,
and socket for damage2Inspect all wires for corroding, pinching, and cracking3Inspect the bulb for wattage, voltage, and