2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 454Get this manual

2007 Arctic Cat ATVs 400/500/650/700 Service Manual, Page 454

INSTALLING 1Place the shift rod into position on the engine shift arm and secure with the existing E-clip2Using new lock
and disconnect the multi-pin connector3Mount the speedometer and secure with the two nuts; then connect the multi-pin connectorAF941A
3Place the spring into position between the upper shift arm and shift lever; then making sure the O-rings are in place on
the axle, secure the shift lever to the arm with the existing axle and nut4Check shift lever adjustment (see Section 2);
then tighten jam nut (A) securely5Install the left-side splash panel 4Install the instrument pod and secure with the reinstallable