2007 Arctic Cat ATVs factory service and repair manual, Page 18Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 18

l NOTE: On the TBXl5001650 HI, the seat, storage compartment cover assembly, compartment box, air filterlfilter housing,
Valve Clearance Adjuster 0444-078) for this procedure Always wear safety glasses when using compressed air 2Remove the recoil
starter assembly; then remove the valve timing inspection plug and the cylinder head cover 3Place the valve adjuster onto
the jam nut securing the tappet adjuster screw; then rotate the valve adjuster dial clockwise until the end is seated in
the tappet adjuster screw4While holding the valve adjuster dial in place, use the valve adjuster handle and loosen the jam
nut; then rotate the tap et adjuster screw clockwise until friction is fl ! 5Align the valve adjuster handle with one of
the marks on the valve adjuster dial 6While holding the valve adjuster handle in place, rotate the valve adjuster dial counterclockwise
until proper valveltappet clearance is attained1 NOTE: Refer to the appropriate specifications in Feeler Gauge Procedure