2007 Arctic Cat ATVs factory service and repair manual, Page 19Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 19

Rotating the engine ensures that any trapped oil is squeezed from the tappets and tappet shimsOil trapped in these areas
be within specificationsVALVEITAPPET CLEARANCE (700EFI) Exhaust 0.10-0.20 mm (0.004-0.008 in 0.20-0.30 mm (0.008-0.012 in
5Identify the valves that are not within specifications; then remove the corresponding camshaft (see SectionRemoving Top-Side
Components) passageway is not plugged, shims could fall into the engine crankcase 8Note the three digit number on the surface
of the tappet shim; then refer to the appropriate tappet shim selection table at the end of this section for the correct