2007 Arctic Cat ATVs factory service and repair manual, Page 24Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 24

A CAUTION Do not over-fill the engine with oilAlways make sure that the oil level is above the "L" mark but not hiqher than
strainer into position beneath the crankcase and secure with the Phillis-head caD screwsTighten securely1 1 To check the
oil strainer, use the following procedure1Remove the belly panel 2Remove the cap screws securing the oil strainer cap; then
remove the capAccount for the O-ring 5Place the strainer cap into position on the strainer making sure the O-ring is properly