2007 Arctic Cat ATVs factory service and repair manual, Page 35Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 35

Adjusting Differential Lock Cable NOTE: The following procedure does not include the 400 TRV model If the differential or
at the end of the differential lo& l&er2Select the 2WD position on the front drive selector switch; thin turn the ignition
switch to the ON position and select the LOCK position on the differential lock selectorThe front drive actuator should operate
engaging four-wheel driveNOTE: It may be necessary to turn the handlebar or rock the ATV forward and backward to align the
differential lock splines and allow engagement 3Return the differential lock selector to the UNLOCK position and listen for