2007 Arctic Cat ATVs factory service and repair manual, Page 50Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 50

INOTE: Use cable ties or tape to secure the carburetor assembly above the handlebar to keep it from interfering with the
high tension lead from the spark plugAt the ignition coil, remove the cap screw, nut, and the two wire leads; then remove
the coil18Disconnect the battery ground (negative) cable from the crankcase cover; then disconnect the positive cable from
the starter motor 20Loosen the clamp on the crankcase breather vent hose; then disconnect the hose and remove itthe enginetransmission