2007 Arctic Cat ATVs factory service and repair manual, Page 60Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 60

I NOTE: When removing the right-side cover, account for the release roller guide that it does not fall and cause damage 4Remove
it has "left-hand" threads 6Remove the primary drive one-way clutch from the centrifugal clutch housingNote the word OUTSIDE
stamped on the clutch for assembly purposes 3Remove the cap screw securing the clutch release arm and remove the arm; then
in crisscross pattern, remove the four cap screws securing the clutch release roller assembly I NOTE: Scribe reference mark
with marker on the arm and shaft to aid in installing 7Using the Clutch Sleeve Hub Holder (pln 0444-007) to hold the clutch