2007 Arctic Cat ATVs factory service and repair manual, Page 76Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 76

Assemblingllnstalling 1If removed, insert the spiral spring into the case with the outer end of the spring around the mounting
thread the rope through the handle and secure it with double knotInstall the protective cover into the handleAlign the inner
hook of the spiral spring with the notch in the reel 9Remove the spiral spring from the case by lifting the spring end up
and outHold the remainder of the spring with thumbs and alternately release each thumb to allow the spring to gradually release
from the case 10Unwind the rope from the reel and remove the ropeCleaning and Inspecting W NOTE: Whenever part is worn excessively,
cracked, or damaged in any way, replacement is necessary 1Clean all components 2Inspect the springs and ratchet for wear
or damage3Inspect the reel and case for cracks or damage 4Inspect the shaft for wear, cracks, or damage 5Inspect the rope
for breaks or fraying6Inspect the spiral spring for cracks, crystallization, or abnormal bends7Inspect the handle for damage,