2007 Arctic Cat ATVs factory service and repair manual, Page 78Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 78

3Shift fork to groove side clearance must be within specifications Servicing Right-Side Components 1NOTE: Whenever part is
and be cleaned 1Using calipers, in turn measure the width of each shift fork groove 1 NOTE: When removing components from
the pri- mary gear assembly, account for the bushing that fits into the primary gear 2Shift fork groove width must be within
specificationsMEASURING SHIFT FORK TO GROOVE (Side Clearance) 1In turn, insert each shift fork into its groove InspectingIMeasuring
Clutch Driven Plate Warpage 2Using feeler gauge, measure the clearance between the shift fork and the groove 1Inspect each