2007 Arctic Cat ATVs factory service and repair manual, Page 79Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 79

u Inspecting clutch shoe groove 3Maximum driven plate warpage must not exceed specificationsMeasuring Clutch Drive Plate
both directions, the drive assembly must be replacedMeasuring Clutch Spring Length 2Drive plate thickness must not exceed
minimum specifications3If the fiber plate tabs are damaged, the plate must be replaced 1Using calipers, measure the overall
free length of the clutch spring 4Inspect the clutch sleeve hub for grooves or notchesIf grooves or notches are present,
replace the hubInspecting Centrifugal Clutch Shoe 1Inspect the clutch shoe for uneven wear, chips, cracks, or discoloration2Inspect
the depth of the grooves in the clutch shoesIf any shoe is worn to the bottom of the groove, replace the complete set2Overall