2007 Arctic Cat ATVs factory service and repair manual, Page 94Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 94

4Place the bearing C-ring into position in the crankcase; then install the front shaft and rear shaft assemblies 7Place each
sure the washer is on the countershaft 8Engage the four forks to the gear shift cam; then install the reverse shift cam and
spacer 6Install the reverse idle shaft with circlip making sure the oil hole in the shaft is facing downward; then install
washer, bushing, reverse idle gear, and washeri NOTE: The reverse idle gear is directionalCare must be taken that it is installed