2007 Arctic Cat ATVs factory service and repair manual, Page 97Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 97

7Install the gear shift shaft 9Place the chain into the crankcase; then secure it from the top side with wire for ease of
the crankcase; then secure with the washer and nut (threads coated with red Loctite #271) tightened to specifications The
clutch sleeve hub and the clutch pressure plate must be seated in the proper positionIf any of the incorrect positions are
used, the hub and plate will have clearance between them and they will not operate properly 11Simultaneously, place the primary
clutch assembly and the centrifugal clutch housing on their respective shafts making sure the sleeve is properly positioned