2007 Arctic Cat ATVs factory service and repair manual, Page 135Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 135

A CAUTION Incorrect installation of the piston rings will result in enqine damaqe Measuring Cylinder Head Distortion CYLINDERICYLINDER
surface plate covered with #400 grit wet-or-dry sandpaperUsing light pressure, move the cylinder head in figure eight motionInspect
the sealing surface for any indication of high spotsA high spot can be noted by bright metallic finishCorrect any high spots
before assembly by continuing to move the cylinder head in figure eight motion until uniform bright metallic finish is attainedCleaningllnspecting
Cylinder 1Wash the cylinder in parts-cleaning solvent 2Inspect the cylinder for pitting, scoring, scuffing, warpage, and
corrosionIf marks are found, repair the surface using cylinder hone (see Honing Cylinder in this sub-section)3Place the cylinder
on the surface plate covered with #400 grit wet-or-dry sandpaperUsing light pressure, move the cylinder in figure eight motionInspect
the sealing surface for any indication of high spotsA high spot can be noted by bright metallic finishCorrect any high spots