2007 Arctic Cat ATVs factory service and repair manual, Page 139Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 139

A CAUTION During the disassembly procedure, make sure all spring tension is released before continuing 6Remove the ratchet
the recoil case; then remove the ratchet guide from the friction plate IcaseWear safety glasses to avoid injury 5Remove the
spring cover, spring, and shaft 8Remove the protective cover from the starter handle and pull the rope out of the handle;
then untie the knot in the rope and remove the handle1NOTE: Do not remove the spiral spring unless replacement is necessaryIt