2007 Arctic Cat ATVs factory service and repair manual, Page 141Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 141

Servicing Right-Side Components 1 NOTE: Whenever part is worn excessively, cracked, damaged in any way, or out of tolerance,
two or three times to check for correct tensioni NOTE: Increasing the rotations in step 11 will increase spring tension Inspecting
clutch shoe groove ATV1014 INSPECTING CENTRIFUGAL CLUTCH HOUSING 13Place the recoil starter assembly into position on the
left-side cover; then tighten the cap screws to specifications 1Inspect the clutch housing for burns, marks, scuffs, cracks,
scratches, or uneven wear 2If the housing is damaged in any way, the housing must be replacedINSPECTING PRIMARY ONE-WAY DRIVE
1Insert the drive into the clutch housing2Rotate the inner race by hand and verify the inner race rotates only one direction3If