2007 Arctic Cat ATVs factory service and repair manual, Page 143Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 143

8Release the preload slowly; then continue to relax the spring until the wing nut is flush with the end of the threads9Firmly
bar, loosen the notched-ring nut; then spin the nut free of the hub 10Using thin pry-bar or screwdriver, work the movable
face sleeve upward and free of the O-rings; then remove the sleeve 7Firmly hold the handle and slowly turn the wing nut counterclockwise
to relax the spring1 NOTE: There will be tendency for the handle to rotate clockwise approximately turn as the spring holder