2007 Arctic Cat ATVs factory service and repair manual, Page 144Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 144

Assembling 1Place the fixed face of the driven pulley on the pulley compressor base making sure the dowel pins are engaged
the movable face for nicks, tears, or swelling 2Apply multi-purpose grease to the O-rings and grease seals on the movable
face; then install on the fixed face making sure the alignment marks are properly aligned 3Inspect two grease seals in the
movable face for nicks, cuts, or damage 3Install the three pins and spacers into the fixed face hub; then pack the cam slots