2007 Arctic Cat ATVs factory service and repair manual, Page 160Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 160

11While holding the cam chain sprocket to the side, install the rear cam chain tensioner guide into the cylinder headInstall
is seated, make sure the alignment pin in the camshaft aligns with the smallest hole in the sprocket 8Install the two lower
nuts securing the cylinder head to the cylinder, one in front and one in rear 13With the alignment pin installed in the camshaft,
loosely place the cam sprocket (with the recessed side facing the camshaft lobes) onto the camshaft and place it into position
with the cam chain over thesprocket- 9In crisscross pattern, tighten the four cylinder head cap screws (from step 7) to specificationsTighten
the two lower cylinder head nuts (from step 8) to specifications and the cylinder-to-crankcase nuts (from step 4) to specifications