2007 Arctic Cat ATVs factory service and repair manual, Page 169Get this manual

2007 Arctic Cat ATVs factory service and repair manual, Page 169

13Secure the carburetor assembly up and away from the engine14Remove the E-clip securing the shift rod to the engine shift
muffler, A for the two exhaust springs 19Remove the positive cable from the starter motor and route it out of the way 16Remove
the two cap screws securing the exhaust pipe to the cylinder head; then remove the pipe 20Disconnect the speed sensor connector
from the sensor housing 17Remove the two coolant hoses from the engine; then route the hoses out of the way 21On the right-side,